Panasonic KX-TGE262C, Operating Instructions Manual

Page: 27 / 80

Making cellular calls
Available for:
KX-TG465SK series (page 3)
1
Press M CELL 1 N or M CELL 2 N .
2
Dial the phone number.
3
When the other party answers, speak into
the microphone.
4
When you finish talking, press MZN .
Note:
R For best performance, use the
speakerphone in a quiet environment.
R While on a call, you can switch from the
base unit to the handset:
– With the privacy mode off (page 42),
press M CELL N
*1
on the handset. a MbN :
Select the desired cellular phone. a
M SELECT N a Press MZN on the base
unit.
– If the handset is on the base unit, simply
lift it.
*1 The call is taken when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular
calls (page 20).
Adjusting the speaker volume
Press MjN or MkN repeatedly while talking.
Redialing the last number dialed
1
Press M CELL 1 N or M CELL 2 N .
2
M REDIAL N
Making landline calls
1
MZN
2
Dial the phone number.
3
When the other party answers, speak into
the microphone.
4
When you finish talking, press MZN .
Note:
R While on a call, you can switch from the
base unit to the handset:
– Press
M N on the handset, then press
MZN on the base unit with the privacy
mode off (page 42).
– If the handset is on the base unit, simply
lift it.
Redialing the last number dialed
MZN a M REDIAL N
Pause (for PBX/long distance service
users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 34).
Example: If you need to dial the line access
number “9” when making outside calls with a
PBX:
1
MZN
2
9 a M PAUSE N
3
Dial the phone number.
Note:
R A 3.5 second pause is inserted each time
M PAUSE N is pressed.
Answering calls
When a landline call is being received, the
SP-PHONE indicator flashes rapidly.
When a cellular call is being received, the
CELL indicator and SP-PHONE indicator flash
rapidly.
1
Press MZN when the unit rings.
R You can also answer the cellular call
by pressing
M CELL 1 N or M CELL 2 N .
2
Speak into the microphone.
3
When you finish talking, press MZN .
27
Making/Answering Calls Using the Base Unit
TGE26x_27xC(en)_1224_ver012.pdf 27 2013/12/24 15:43:30