Voicemail service
In addition to your unit’s answering system
you may also have voicemail service from
your phone service provider.
Voicemail is
an answering service that may be offered by
your phone service provider. This service can
also record calls when you are unavailable to
answer the phone or when your line is busy.
Messages are recorded on the phone
company system and not on the unit’s
answering system.
R
To use the voicemail service rather than the
unit’s answering system, turn off the
answering system (page 25).
If you have unit’s answering system set to on
and also the voicemail enabled, the system
with least amount of rings will record the
message first.
Example:
If the unit’s answering system is set to 4 rings
(page 27) and the voicemail answering system
provided by your phone company is set to 6
rings (call your service provider), the unit’s
answering system will record the incoming call
first.
Storing the voicemail (VM)
access number
You can store the phone number used to
access your voicemail service.
1
M
MENU
N#331
2
Enter your access number.
a
M
SAVE
N
a
M
OFF
N
Note:
R
When storing your voicemail access
number and your mailbox password, press
MDN
(Pause) to add pauses (page 12)
between the access number and the
password as necessary. Contact your
phone service provider for the required
pause time.
Example:
1-222-333-4444
VM access
number
Pauses
Password
PPPP
8888
To erase the voicemail access number
1
M
MENU
N#331
2
Press and hold
M
CLEAR
N
until all digits
are erased.
a
M
SAVE
N
a
M
OFF
N
Voicemail (VM) tone detection
Your voicemail service provider sends special
signals to the unit to let you know that you
have new voicemail messages. If you hear a
series of dial tones followed by a continuous
dial tone after you press
M
N
, you have new
voicemail messages.
The unit can detect these signals
automatically. Turn this feature off in the
following situations.
– You do not subscribe to voicemail service.
– Your phone is connected to a PBX.
Turning VM tone detection on/off
1
M
MENU
N#332
2
MbN
: Select the desired setting.
a
M
SAVE
N
a
M
OFF
N
Listening to voicemail messages
1
M
MENU
N#330
R
The speakerphone turns on.
2
Follow the pre-recorded instructions.
3
When finished, press
M
OFF
N
.
Note:
R
You can also use the
M
VM
N
soft key, if
displayed, to play new voicemail messages.
R
If the handset still indicate there are new
messages even after you have listened to
all new messages, turn it off by pressing
and holding
#
until the handset beeps.
28
For assistance, visit www.panasonic.ca/english/support
Useful Information
TGD39xC_(en)_ver021.pdf 28
2016/01/25 15:56:52
