Key
Operation
2
Skip message
(during playback)
4
Play new messages
5
Play all messages
6
Play greeting message
7
Record greeting message
9
Stop recording
Stop playback
0
Turn answering system off
*4
Erase currently playing message
*5
Erase all messages
*6
Reset to a pre-recorded greeting
message (during greeting message
playback)
*#
End remote operation
(or hang up)
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
Turning on the answering system
remotely
1
Dial your phone number from a
touch-tone phone.
2
Let the phone ring 15 times.
R
A long beep is heard.
3
Enter your remote access code within 10
seconds after the long beep.
R
The greeting message is played back.
R
You can either hang up, or enter your
remote access code again and begin
remote operation (page 31).
Answering system settings
Call screening
While a caller is leaving a message, you can
listen to the call through the handset’s
speaker. To adjust the speaker volume, press
MDN
or
MCN
repeatedly. You can answer the call
by pressing
M
N
on the handset. Call
screening can be set for each handset. The
default setting is
“
On
”
.
1
M
N#310
2
MbN
: Select the desired setting.
a
M
OK
N
a
M
N
Number of rings before the unit
answers a call
You can change the
“
Number of Rings
”
before the unit answers a call. You can select
2 to 9 rings, or
“
Auto
”
.
The default setting is
“
5 Rings
”
.
“
Auto
”
: The unit’s answering system answers
at the end of the 2nd ring when new
messages have been recorded, or at the end
of the 5th ring when there are no new
messages. If you call your phone from outside
to listen to new messages (page 31), you
know that there are no new messages when
the phone rings for the 3rd time. You can then
hang up without being charged for the call.
1
M
N#211
2
MbN
: Select the desired setting.
a
M
OK
N
a
M
N
For service provider voice mail
subscribers
To receive voice mail and use the answering
system properly, please note the following:
R
“Voice mail” is a service provided by your
service provider/telephone company . You
will need to first subscribe or activate this
service through your service provider/
telephone company. Contact your service
provider/telephone company on how to
operate this service and how you will be
notified that you have messages on your
voice mail.
To use this service, you will be required to
leave your answering machine off on your
unit.
This will allow the voice mail to receive any
messages.
R
To use the unit’s answering machine rather
than the voice mail service provided by
your service provider/telephone company,
32
Answering System
TGC22xAL_OI_(en-en)_0530_ver.002.pdf 32
2014/05/30 22:00:43
