background image

– 5 –

L

Regularly remove any dust, etc. from the AC adaptor/power plug by 
pulling it from the power outlet, then wiping with a dry cloth. 
Accumulated dust may cause an insulation defect from moisture, etc. 
resulting in a fire.

L

Unplug the product from power outlets if it emits smoke, an abnormal 
smell, or makes an unusual noise. These conditions can cause fire or 
electric shock. Confirm that smoke has stopped emitting and contact 
an authorised service centre.

Installation

L

To prevent the risk of fire or electrical shock, do not expose the product 
to rain or any type of moisture.

L

Do not place or use this product near automatically controlled devices 
such as automatic doors and fire alarms. Radio waves emitted from 
this product may cause such devices to malfunction resulting in an 
accident.

L

It is advised not to use the equipment at a refuelling point. Users are 
reminded to observe restrictions on the use of radio equipment in fuel 
depots, chemical plants or where blasting operations are in progress.

CAUTION

Installation and relocation

L

The AC adaptor is used as the main disconnect device. Ensure that 
the AC outlet is installed near the product and is easily accessible.

Battery

L

We recommend using the supplied batteries or additional/replacement 
batteries noted in the base unit's operating instructions for 
replacement battery information. 

USE ONLY rechargeable Ni-MH 

batteries AAA (R03) size

.

L

Do not mix old and new batteries.

L

Do not open or mutilate the batteries. Released electrolyte from the 
batteries is corrosive and may cause burns or injury to the eyes or skin. 
The electrolyte may be toxic if swallowed.

TGA830AZ(e).fm  Page 5  Wednesday, June 4, 2008  4:26 PM

Summary of Contents for KX-TGA830AZ









Reviews: