– 4 –
Registering the handset to the base unit
Ensure that the handset is switched on. If it is not on, press and hold
{ih}
for few seconds to turn the handset on.
1
Handset:
Lift the handset and press
{ih}
.
2
Base unit:
Press and hold
{x}
for about 5 seconds. (No registration tone)
L
If all registered handsets start ringing, press the same button to
stop. Then repeat this step.
3
Handset:
Place the handset on the base unit.
L
Continue the operation even when the handset display shows
“
Please Wait...
”
.
4
With the handset still on the base unit, wait until a confirmation tone
sounds and
w
stops flashing.
Note:
L
If an error tone sounds, or if
w
is still flashing, register the handset
according to the base unit’s operating instructions.
For your safety
To prevent severe injury and loss of life/property, read this section
carefully before using the product to ensure proper and safe operation of
your product.
WARNING
Power connection
L
Completely insert the AC adaptor/power plug into the power outlet.
Failure to do so may cause electric shock and/or excessive heat
resulting in a fire.
TGA830AZ(e).fm Page 4 Wednesday, June 4, 2008 4:26 PM
