For assistance, please visit http://shop.panasonic.com/support
3
*1
The time elapsed after turning on the range extender while pressing and holding
down
{
PROGRAM
}
.
Installation/Registering the range extender to the base unit
1
Range extender: Connect the AC adaptor to a power outlet.
L
Use only the supplied Panasonic AC adaptor PNLV226.
L
When the unit is turned on, the STATUS indicator and
w
indicator light amber
for about 2 seconds.
L
If the range extender is not yet registered, the STATUS indicator lights amber. If
the range extender is already registered, the STATUS indicator lights red while
the
w
indicator flashing red.
2
Base unit: Press and hold
{
LOCATOR
}
for about 5 seconds.
L
Depending on the base unit, a registration tone sounds.
L
If all registered handsets start ringing, press the same button to stop. Then
repeat this step.
L
The next step must be completed within 90 seconds.
3
Range extender: Press and hold
{
PROGRAM
}
for about 3 seconds to enter
the registration mode.
L
When the unit is in the registration mode, the STATUS indicator flashing green.
4
Range extender: Release
{
PROGRAM
}
L
The STATUS indicator continue flashing green while registering.
L
After registration complete, STATUS indicator and
w
indicator light amber for 2
seconds. Then, the STATUS indicator lights red while the
w
indicator flashing
red before registration complete.
5
Range extender: Confirm that the STATUS indicator and
w
indicator light
green. (The unit is ready for use.)
L
If the indicators do not light green, re-position the unit in a place where the
indicators light green.
Red Flashing
Off
Entering deregistration mode. (0-10 seconds
*1
)
Red On
Off
Deregistration complete. (after 10 seconds
*1
)
Off
Off
The power is off.
Indicators
Meaning
STATUS
w
/ ID
Press plug firmly.
Hook
(120 V AC, 60 Hz)
TGA407(option)_(e-e).fm Page 3 Tuesday, December 26, 2017 8:48 AM