![background image](http://html1.mh-extra.com/html/panasonic/kx-tga407b/kx-tga407b_installation-manual_3572970004.webp)
4
For assistance, please visit http://shop.panasonic.com/support
6
Base unit: To exit registration mode, press
{
LOCATOR
}
.
L
Depending on the base unit, it will automatically return to standby after
registration completed.
Note:
L
The AC adaptor must remain connected at all times. (It is normal for the adaptor to
feel warm during use.)
L
The AC adaptor should be connected to a vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a horizontally oriented AC outlet that faces
the floor, such as an AC outlet installed on a ceiling or under a table, as the weight
of the adaptor may cause it to become disconnected.
L
The unit can support a maximum of 2 handsets at a time.
L
Up to 2 range extenders can be registered to the base unit.
Deregistering the range extender from the base unit
1
Unplug the AC adaptor from power outlet, then press and hold
{
PROGRAM
}
.
2
While pressing and holding
{
PROGRAM
}
, re-connect the AC adaptor.
L
When the unit is in the deregistration mode, the STATUS indicator flashing red.
3
Keep pressing and holding
{
PROGRAM
}
for about 10 seconds until the
STATUS indicator light red. Then release
{
PROGRAM
}
.
L
After deregistration complete, STATUS indicator and
w
indicator light amber for
2 seconds. Then,
w
indicator lights off.
Wall Mounting
Drive the screws (not supplied) into the wall. Mount the unit, then slide it down.
Note:
L
Make sure that the wall is strong enough to support the weight of the unit.
37.0 mm
(1
15
/
32
inches)
Screws
TGA407(option)_(e-e).fm Page 4 Tuesday, December 26, 2017 8:48 AM