background image

Installation Guide

By installing this unit, you can extend the range of your phone system to include 
areas where reception was previously not available. 
The unit extends the range in all directions, allowing several floors to be covered.

Important:

L

This unit is an accessory unit for use with a Panasonic Digital Cordless phone. 
For more details, visit our Web site: 

http://www.panasonic.com/RangeExtender

 

L

You must register this unit with your base unit before it can be used.

L

For assistance, visit our Web site: 

http://www.panasonic.com/help

for customers in the U.S.A. or Puerto Rico.

Accessory information

Supplied accessories

For best performance

Placement

L

Install the unit within base unit range in an indoor environment. We recommend 
installing the unit in a raised position (such as on a wall).

L

Avoid positioning the unit close to objects that will interfere with reception, such as 
thick walls, radiators, metal shelving, etc.

L

For maximum distance noise-free operation, place the unit away from electrical 
appliances such as TV, radio, personal computer, or other telephone equipment.

Range Extender

Model No.

 

KX-TGA405

Accessory item/Order number

Quantity

AC adaptor/PQLV219Y

1

Printed in China

PNQW2215YA    

DC0410SN1024  (A)

TGA405(option)_(e-e).fm  Page 1  Wednesday, March 5, 2014  4:56 PM

Summary of Contents for KX-TGA405













Reviews: