manualshive.com logo in svg

Panasonic KX-TG9541, Operating Instructions Manual

Share
Download
Panasonic KX-TG9541 Operating Instructions Manual Download Page 65

Troubleshooting

If you still have difficulties after following the instructions in this section, disconnect the base unit’s AC
adaptor, then reconnect the base unit’s AC adaptor. Remove the batteries from the handset, and then
insert the batteries into the handset again.

General use

Problem

Cause/solution

The handset does not turn on
even after installing charged
batteries.

R

Place the handset on the base unit or charger to turn on the
handset.

The unit does not work.

R

Make sure the batteries are installed correctly (page 11).

R

Fully charge the batteries (page 11).

R

Check the connections (page 9).

R

Unplug the base unit’s AC adaptor to reset the unit. Reconnect
the adaptor and try again.

R

The handset has not been registered to the base unit. Register
the handset (page 46).

I cannot pair a cellular phone to
the base unit.

R

Depending on the compatibility of the cellular phone, you may
not be able to pair it to the base unit. Confirm that your cellular
phone supports the hands-free profile (HFP) specification.

R

Confirm that the Bluetooth feature of your cellular phone is
turned on. You may need to turn this feature on depending on
your cellular phone.

R

The Bluetooth technology on your cellular phone may not be
functioning normally. Turn off and on your cellular phone.

R

If your cellular phone is already connected to another Bluetooth
device such as a Bluetooth headset, turn it off or disconnect it
from your cellular phone.

R

Some cellular phones may require you to enter the base unit
PIN to pairing. Confirm that you entered the correct PIN.

I cannot connect a cellular phone
to the base unit.

R

Confirm that your cellular phone is turned on.

R

Confirm that your cellular phone is within base unit range
(page 14).

R

Depending on the state of the wireless environment, such as
the presence of any electrical interference, there may be a
delay even if the auto connection feature is turned on. You can
connect to the base unit manually (page 20).

R

The cellular phone has not been paired to the base unit. Pair
the cellular phone (page 18).

I cannot hear a dial tone.

R

Make sure that the CELL indicator lights up (page 15).

R

The base unit’s AC adaptor or telephone line cord is not
connected. Check the connections.

R

Disconnect the base unit from the telephone line and connect
the line to a known working telephone. If the working telephone
operates properly, contact our service personnel to have the
unit repaired. If the working telephone does not operate
properly, contact your service provider/telephone company.

The base unit beeps.

R

New messages have been recorded. Listen to the new
messages (page 56).

For assistance, please visit http://www.panasonic.com/help

65

Useful Information

TG954x(en)_0528_ver011.pdf   65

2013/05/28   11:09:55

Summary of Contents for KX-TG9541

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands