Panasonic KX-TG9385BXT, Service Manual

Page: 52 / 92

52
KX-TG9385BXT/KX-TGA939BXT
11.2.3. Commands
See the table below for frequently used commands.
Command name Function Example
rdeeprom Read the data of EEPROM Type “rdeeprom 00 00 FF”, and the data from address
“00 00” to “FF” is read out.
readid Read ID (RFPI) Type “readid”, and the registered ID is read out.
writeid Write ID (RFPI) Type “writeid 00 18 E0 0E 98”, and the ID “0018 E0 0E
98” is written.
setfreq Adjust Frequency of RFIC Type “setfreq nn”.
hookoff1/hookoff2 Off-hook mode on Base Line1 & Line2 Type “hookoff1” for Line1.
hookon1/hookon2 On-hook mode on Base Line1 & Line2 Type “hookon1” for Line1.
getchk Read checksum Type “getchk”.
wreeprom Write the data of EEPROM Type “wreeprom 01 23 45”. “01 23” is address and “45”
is data to be written.
bursttx Burst TX mode Type “bursttx”
textrx Test RX mode Type “testrx”
tph High TX mode Type “tph”
tpl Low TX mode Type “tpl”