Problem
Cause/solution
Noise is heard during a call
on the headset.
R
A Bluetooth headset can communicate with the
base unit within a range of approximately 10 m.
The connection may be subject to interference
from obstructions such as walls or electronic
devices. Move closer to the base unit.
I cannot connect my
headset to the base unit.
R
Confirm that your headset is turned on.
R
If your headset is already connected to another
Bluetooth device such as your cellular phone,
disconnect the headset from your cellular phone,
then perform the connecting procedure from the
base unit.
R
If someone is using a cellular line, you cannot
connect the headset. There can be only one active
Bluetooth connection at a time.
R
The headset has not been registered to the base
unit. Register the headset (page 45).
Some headset enhanced
features are not available.
R
The base unit does not support enhanced features
such as Last number redial or Call reject.
An error tone is heard
when I try to program the
Bluetooth feature.
R
The Bluetooth feature cannot be accessed
immediately after connecting the AC adaptor to
the base unit. Wait a few seconds and try again.
R
The headset has not connected to the base unit
yet, even though you performed the connecting
procedure setting. Wait a few seconds and try
again.
67
Useful Information
TG76xxAZ(en)_0207_ver012.pdf 67
2012/02/07 15:34:49
