*12 Turn this feature off if you prefer not to hear key tones while you are dialling or
pressing any keys, including confirmation tones and error tones.
*13 If you subscribe to a Caller ID service and want to view the caller’s information
after lifting up the handset to answer a call, turn off this feature.
*14 The recall time depends on your telephone exchange or host PBX. Contact your
PBX supplier if necessary.
You can access your service provider/telephone company “call waiting” service
by having the recall time set at
“
100 ms
”
, and then follow your service provider/
telephone company “call waiting” instructions to operate this service. (for
Australia)
*15 The default setting will be as follows if you select the following regional code
when changing the unit’s region setting (page 38):
“
Newzealand
”
=
“
600 ms
”
*16 Generally, the line mode setting should not be changed. This setting
automatically maintains receiver volume at the proper level depending on the
current telephone line condition. Set the line mode to
“
A
”
if telephone line
condition is not good.
35
Programming
TG76xxAZ(en)_0207_ver012.pdf 35
2012/02/07 15:34:47
