Answering System Features
27
3
Enter your remote access code
within 10 seconds after the long
beep.
L
The greeting message is played
back.
L
You can hang up, or enter your
remote access code again and
begin remote operation.
Answering system
settings
Number of rings
You can change the number of times the
phone rings before the unit answers
calls. You can select 2 to 7 rings, or
“
Auto
”
.
“
Auto
”
: The unit answers after 2 rings
when new messages have been
recorded, and after 5 rings when there
are no new messages. If you call your
phone from outside to listen to new
messages (page 26), you will know that
there are no new messages when the
phone rings for the 3rd time. You can
then hang up without being charged for
the call.
1
{j
/OK
}
2
{^}
/
{V}
:
“
Answer System
”
i
{
>
}
3
{^}
/
{V}
:
“
Settings
”
i
{
>
}
4
{^}
/
{V}
:
“
Number of Rings
”
i
{
>
}
5
{^}
/
{V}
: Select the desired setting.
i
{
>
}
i
{ih}
For voice mail service subscribers
Please note the following:
– To receive messages correctly with
your voice mail service, we
recommend that you do not use the
unit’s answering system. Make sure
that the answering system is turned
off (page 23).
– If you would rather use the unit’s
answering system than the voice mail
service provided by your service
provider/telephone company, ask your
service provider/telephone company
to deactivate your voice mail service.
If your service provider/telephone
company cannot do this, set this unit’s
“
Number of Rings
”
setting so that
this unit’s answering system answers
calls before your service
provider/telephone company’s voice
mail service tries to answer your calls.
It is necessary to check the number of
rings required to activate the voice
mail service provided by your service
provider/telephone company before
changing this setting.
Caller’s recording time
You can change the maximum message
recording time allotted to each caller, or
set the unit to greet callers but not record
messages.
1
{j
/OK
}
2
{^}
/
{V}
:
“
Answer System
”
i
{
>
}
3
{^}
/
{V}
:
“
Settings
”
i
{
>
}
4
{^}
/
{V}
:
“
Recording Time
”
i
{
>
}
Setting (default setting)
Page
Answering system on/off
(
Answer On
)
23
Remote access code (—)
26
Number of rings
(
3 Rings
)
27
Caller’s recording time
(
3 Minutes
)
27
Call screening
(
On
)
28
TG7200-7220TW(e-e).book Page 27 Wednesday, April 25, 2007 4:49 PM
