Panasonic KX-TG6671C, Operating Instructions Manual

Page: 12 / 52

Item Meaning
In use
Answering system is being
used by the base unit or
another handset.
Line in use Someone is using the line.
Initial settings
n Direct command code:
Programmable settings can be accessed by
pressing
M MENU N , # and then the
corresponding code on the dial keypad
(page 20).
Example: Press M MENU N#110 .
n Symbol meaning:
Symbol Meaning
Perform with the base unit.
Perform with the handset.
Example:
MbN : “
Off
”
Press MCN or MDN to select
the words in quotations.
Important:
R When you install the batteries for the first time,
the handset may prompt you to set display
language and date and time.
Perform step 2 in “Display language”,
page 12, and then press
M SELECT N .
Continue from step 2 in “Date and time”,
page 12.
Display language
You can select either “
English
” or “
Français
”
as the display language. The default setting is
“
English
” .
Base unit / Handset
1
M MENU N#110
2
MbN : Select the desired setting. a M SAVE N
3
Proceed with the operation for your unit.
Base unit: M n N (EXIT)
Handset: M OFF N
Date and time
Handset
1
M MENU N#101
2
Enter the current month, date, and year by
selecting 2 digits for each.
Example: July 15, 2011
07 15 11
3
M OK N
4
Enter the current hour and minute (12-hour
clock format) by selecting 2 digits for each.
Example: 9:30
09 30
5
M AM/PM N : Select “
AM
” or “
PM
” .
6
M SAVE N a M OFF N
Note:
R When English is selected as the display
language, 12-hour clock format is used. When
French is selected, 24-hour clock format is used.
R The date and time may be incorrect after a
power failure. In this case, set the date and time
again.
Voice guidance language
You can select either “
English
” or “
Français
”
as the voice guidance language of the Talking Call
Display and answering system. The default setting
is
“
English
” .
Handset
1
M MENU N#112
2
MbN : Select the desired setting.
3
M SAVE N a M OFF N
Dialing mode
If you cannot make calls, change this setting
according to your telephone line service. The
default setting is
“
Tone
” .
“
Tone
” : For tone dial service.
“
Pulse
” : For rotary/pulse dial service.
Handset
1
M MENU N#120
2
MbN : Select the desired setting.
3
M SAVE N a M OFF N
12
Getting Started