Panasonic KX TG5240 - 5.8 GHz EXPANDABLE CORDLESS... Operating Instructions Manual Download Page 35

Page: 35 / 104

Useful Informat

ion

swe

ring S

yst

repa

rat

ion

Using the Caller List

For assistance, please call: 1-800-211-PANA(7262)

phone S

Viewing the Caller List

• If there is no name information for a caller, the display will only show the phone

number.

• Each handset has its own Caller List. If you viewed the Caller List or answered a

call on one handset, the same information in the other handsets will be displayed
as “

missed

”.

• If you do not press any buttons for 60 seconds, the unit will exit the Caller List.

What “

√

” means

“

√

” indicates you have already viewed this calling

information or answered the call. If the same caller calls
again, the call entry with the “

√

” will be replaced with the

new call entry.

If a caller calls more than once

The number of times the same caller called is displayed
(“

” to “

”). The date and time of the most recent call

will be recorded. After viewing a caller’s information, “

”

to “

” will be replaced with “

√

”.

Calling Back from the Caller List

• In some cases, you may have to edit the number before dialing (p. 36).

(Ex. You may have to delete “1” and the area code.)

• If a phone number is not displayed in the caller information, you cannot call that

caller back from the Caller List.

Press the soft key (

), [

], or [

] to

enter the Caller List.

To search from the most recent call, press [

To search from the oldest call, press [

• The caller’s name, number and the time and date

of the call are displayed.

Press [OFF] to exit the list.

Press the soft key (

), [

], or [

] to enter the Caller List.

Scroll to the desired caller by pressing [

] or [

Press [

] or [

• The phone number is dialed.

Handset

C I D

Ex. 10 calls missed.

Caller list
10 missed calls

=Scroll list

SMITH,JACK

1-555-333-4444
3:10P JUN.10

Example

SMITH,JACK

1-555-333-4444
3:10P JUN.10

√

TURNER,CINDY

1-555-456-7890
11:20A JAN.12

Ex. Called 3 times.

Handset

C I D

Summary of Contents for KX TG5240 - 5.8 GHz EXPANDABLE CORDLESS...









































































































Search results

Summary of Contents for KX TG5240 - 5.8 GHz EXPANDABLE CORDLESS...

Reviews:

Related manuals for KX TG5240 - 5.8 GHz EXPANDABLE CORDLESS...

Brands by name

Popular brands

Panasonic KX TG5240 - 5.8 GHz EXPANDABLE CORDLESS..., Operating Instructions Manual

Search results

Summary of Contents for KX TG5240 - 5.8 GHz EXPANDABLE CORDLESS...

Reviews:

Related manuals for KX TG5240 - 5.8 GHz EXPANDABLE CORDLESS...

Brands by name

Popular brands