Panasonic KX-TG5230AL Operating Instructions Manual Download Page 71

Page: 71 / 76

Useful Info

rmation

Answering

System

Preparatio

Troubleshooting

lephone System

“

Charge for 6 HRS

” and

“

” are displayed and the

handset does not work.

•

The battery has been discharged. Fully charge
the battery (p. 13).

You charged the battery fully,
but “

Recharge battery

” is

still displayed and/or “

”

continues to flash, or “

Charge

for 6 HRS

” and “

” are

displayed.

•

Clean the charge contacts and charge again
(p. 13).

•

The battery may need to be replaced. If you
install a new battery, fully charge it (p. 12, 13).

The CHARGE indicator does
not go out after the battery has
been charged.

•

This is normal.

You cannot have a conversation
using the headset.

•

Make sure the optional headset is connected
properly (p. 57).

•

If “

SP-phone

” is displayed on the handset,

press

[

]

to switch to the headset.

•

Please use only the Panasonic KX-TCA88AL
headset.

Panasonic Australia operates a toll free Customer Support Centre.
Please phone Panasonic on 132600 for assistance.

Problem

Cause & Remedy

TG5230AL.fm Page 71 Friday, June 11, 2004 5:31 PM

Summary of Contents for KX-TG5230AL













































































Search results

Summary of Contents for KX-TG5230AL

Reviews:

Related manuals for KX-TG5230AL

Brands by name

Popular brands

Panasonic KX-TG5230AL, Operating Instructions Manual

Search results

Summary of Contents for KX-TG5230AL

Reviews:

Related manuals for KX-TG5230AL

Brands by name

Popular brands