manualshive.com logo in svg

Panasonic KX-TG5200, Operating Instructions Manual, Page: 57 / 76

Share
Download
Panasonic KX-TG5200 Operating Instructions Manual Download Page 57

Answering

 System

Preparatio

n

57

For assistance, please call: 1-800-211-PANA(7262)

T

e

lephone System

Useful Info

rmation

Troubleshooting

If the handset display shows error messages, see “If the Following Appear on 
Your Display...” (p. 55–56) for the Cause & Remedy.

Problem

Cause & Remedy

“

No link to base.

Move closer to
base and try
again.

” is displayed and an 

alarm tone sounds.

•

The handset has lost communication with the 
base unit. Walk closer to the base unit, and 
try again.

•

Confirm the base unit’s AC adaptor is 
plugged in.

•

Raise the base unit antennas.

•

The handset’s registration may have been 
canceled. Re-register the handset (p. 53, 54).

The handset and/or base unit 
does not work.

•

Check the settings (p. 10–12).

•

Check whether the dialing mode setting is 
correct (p. 15).

•

Fully charge the battery (p. 11).

•

Clean the charge contacts and charge again 
(p. 12).

•

Check battery installation (p. 11).

•

Unplug the base unit’s AC adaptor to reset it. 
Plug in, and try again.

•

The handset has not been registered to the 
base unit. Register the handset (p. 54, steps 
5 and 6).

•

Re-install the battery (p. 11) and fully charge 
it.

Static, sound cuts in/out, 
fades. Interference from other 
electrical units.

•

Move the handset and base unit away from 
other electrical appliances (p. 6).

•

Walk closer to the base unit.

•

Raise the base unit antennas.

•

Turn on the Clarity Booster feature (p. 22).

The handset does not ring.

•

The ringer volume is turned off. Set to high, 
medium, or low (p. 17).

•

If more than one other user is using the 
handset, the handset may not ring. Users will 
hear incoming call tones (p. 46).

The handset display is blank.

•

If the handset display is blank, fully charge 
the battery (p. 11).

Summary of Contents for KX-TG5200













































































Reviews:

No comments