Panasonic KX-TG4500B - Cordless Phone Base Station Operating Instructions Manual Download Page 16

Page: 16 / 124

Preparation

For assistance, please visit http://www.panasonic.com/phonehelp

Installing the battery in the
cordless handset

Insert the battery, and press it down
until it fits in position within the
compartment.

Note:

The end of the battery with the metal
terminals should be inserted first and
should be at the foot of the cordless
handset.

The flat side of the battery should fit
against the inside of the battery
compartment as shown.

Close the cover.

Battery charge

Place the cordless handset on the charger
and charge for

7 hours

before initial use.

Make sure that the cordless handset faces
forward as shown.

The CHARGE indicator will light, and
“

Charging

” is displayed.

When the battery is fully charged,
“

Charge completed

” is displayed.

A discharged battery may charge quickly
and feel warm during the charging
process. This is normal.

Note:

To ensure that the battery charges
correctly, clean the charge contacts of
the cordless handset and charger
monthly with a soft, dry cloth. Clean
more often if the unit is subject to
grease, dust or high humidity.

Charge

contacts

CHARGE indicator

Summary of Contents for KX-TG4500B - Cordless Phone Base Station





























































































































Search results

Summary of Contents for KX-TG4500B - Cordless Phone Base Station

Reviews:

Related manuals for KX-TG4500B - Cordless Phone Base Station

Brands by name

Popular brands

Panasonic KX-TG4500B - Cordless Phone Base Station, Operating Instructions Manual

Search results

Summary of Contents for KX-TG4500B - Cordless Phone Base Station

Reviews:

Related manuals for KX-TG4500B - Cordless Phone Base Station

Brands by name

Popular brands