Caller ID Service
34
Using Caller ID service
Important:
L
This unit is Caller ID compatible. To use
Caller ID features, you must subscribe to a
Caller ID service. Contact your service
provider/telephone company for details.
Caller ID features
*1 KX-TG3811/KX-TG3821 series: page 4
When an outside call is being received, the
caller’s phone number is displayed.
Caller information for the last 50 callers is
logged in the caller list from the most recent
call to the oldest.
L
If the unit cannot receive caller information,
the following is displayed:
–
“
Out of Area
”
: The caller dials from
an area which does not provide a Caller
ID service.
–
“
Private Caller
”
: The caller
requests not to send caller information.
L
If the unit is connected to a PBX system,
caller information may not be properly
received. Contact your PBX supplier.
L
If the name display service is available in
your area, the display shows caller names.
For further information, please contact your
service provider/telephone company.
Missed calls
*1 KX-TG3811/KX-TG3821 series: page 4
If a call is not answered, the unit treats it as a
missed call. The display shows
“
Missed
Call
”
. This lets you know if you should view
the caller list to see who called while you were
away.
Note:
L
Even when there are unviewed missed
calls,
“
Missed Call
”
disappears from the
standby display if the following operation is
performed by one of the units:
– A handset is replaced on the base unit or
charger.
– Pressing
{
OFF
}
on a handset.
– Pressing
{
EXIT
}
on the base unit.
Phonebook name display
When caller information is received and it
matches a phone number stored in the
phonebook, the stored name in the phonebook
is displayed and logged in the caller list.
Note:
L
The base unit display shows only caller
information, not the stored name in the
phonebook. (KX-TG3811/KX-TG3821
series: page 4)
Caller list
Important:
L
Only 1 person can access the caller list at a
time.
L
Make sure the unit’s date and time setting is
correct (page 17).
Viewing the caller list and calling
back
*1 KX-TG3811/KX-TG3821 series: page 4
1
{
3
}
CID
2
Press
{V}
to search from the most recent
call, or
{^}
to search from the oldest call.
L
If
D
is displayed, not all of the
information is shown. To see the
remaining information, press
{
4
}
. To
return to the previous screen, press
{
3
}
.
3
Proceed with the operation for your unit.
Handset:
– To call back, press
{C}
.
– To exit, press
{
OFF
}
.
Base unit:
– To call back, press
{
SP-PHONE
}
.
Y
Handset /
_
Base unit
Y
Handset /
_
Base unit
Y
Handset
Y
Handset /
_
Base unit
TG37xx38xxBX(e).book Page 34 Wednesday, June 8, 2011 2:08 PM
