87
Useful Information
Problem
The unit does not display the
caller’s name and/or phone
number.
The unit does not announce
the displayed caller’s name.
The handset or base unit
display goes to the standby
mode while viewing the
Caller List.
When a second call is
received during a
conversation, the unit does
not display the new caller’s
name and/or phone number.
You cannot page the
handset or the base unit.
Remedy
•
You need to subscribe to a Caller ID
service from a telephone company.
•
Other telephone equipment may be
interfering with your phone. Disconnect
it and try again.
•
Other electrical appliances connected to
the same outlet may be interfering with
the Caller ID information.
•
Telephone line noise may be affecting
the Caller ID information.
•
The handset and base unit ringer
volumes are OFF (p. 18, 19).
•
The Talking Caller ID feature is OFF
(p. 17).
•
Do not pause for over 60 seconds while
searching.
•
The line mode selection is incorrect. See
page 14.
•
The handset is too far from the base unit.
•
The handset or the base unit is engaged
in an outside call, viewing the Caller
List/directory list or listening to
messages. Try again later. If you are
using the base unit, wait until “
Handset
in use
” disappears.
