Panasonic KX-TG2680N Operating Instructions Manual Download Page 53

Page: 53 / 96

Cordless Telephone

Erasing an Item from the Directory

With the handset/base unit

You can erase an item using the handset or the base unit.

Make sure the unit is in the standby mode initially.

Press

to enter the directory list.

Press

•

The first item is displayed.

Press

repeatedly to find the

directory item you want to erase.

•

To search for the item by initial, see page 50.

Press

(CLEAR)

•

To stop erasing, press

(

key)

Press

(

Yes

key) or

(CLEAR)

•

A beep sounds and the item is erased.

•

To erase other items, repeat from step 3.

•

To return to the standby mode, if using the
handset, press

(OFF)

. If using the base unit,

press

(EXIT)

(STOP)

Helen
1234567890

Clear?

=No

=Yes

Clear

Press

(

key).

•

If you want to change the storing name,
number or group setting, press

(

Edit

key)

repeatedly to reach the desired display and
change it.

Press

(

Save

key).

•

A beep sounds.

•

To continue editing other items, repeat from
step 3.

•

To return to the standby mode, press

(OFF)

•

You can exit the programming mode any time by pressing

(OFF)

Jane Walker
0981234567

=Edit

=Save

Jane Walker
0981234567

Directory list

=Caller’s list

Summary of Contents for KX-TG2680N

































































































Search results

Summary of Contents for KX-TG2680N

Reviews:

Related manuals for KX-TG2680N

Brands by name

Popular brands

Panasonic KX-TG2680N, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2680N

Reviews:

Related manuals for KX-TG2680N

Brands by name

Popular brands