Panasonic KX-TG2551CS Operating Instructions Manual Download

Page: 31 / 60

Basic Operation

Lift the handset off the base unit and press

to enter the Caller List.

Press

repeatedly to find the caller

you want to erase from the Caller List.

Press

(CLEAR)

•

A beep sounds and the information is erased.

•

To erase other items, repeat from step 2.

•

To return to the standby mode, press

(FUNCTION/EXIT/CH)

To erase all entries in the Caller List

Before erasing all entries, make sure that “

0 new caller

” is displayed.

Lift the handset off the base unit and press

to enter the Caller List.

Press

(CLEAR)

Press

to select “

All clear

”.

Press

FWD/EDIT

(

Yes

key) or

(CLEAR)

•

A beep sounds and all entries are erased.

•

The handset will return to the standby mode.

Erasing Caller List Information

After checking the Caller List, you can erase some or all of the entries.

Make sure the handset is in the standby mode initially.

To erase a specific caller from the Caller List

REAGAN,TOM
1-888-777-6666
12:20A JAN12

√

Clear

10 new callers

=Directory

Exit

All clear

=Yes

All clear

0 new caller

=Directory

Exit
All clear

=Yes

Summary of Contents for KX-TG2551CS





























































Search results

Summary of Contents for KX-TG2551CS

Reviews:

Related manuals for KX-TG2551CS

Brands by name

Popular brands

Panasonic KX-TG2551CS, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2551CS

Reviews:

Related manuals for KX-TG2551CS

Brands by name

Popular brands