Panasonic KX-TG2551CS Operating Instructions Manual Download

Page: 17 / 60

Preparation

Programmable Functions

Save DIRECT#

Set flash time

Save mailbox#

Voicemail tone

Set line mode

Set dial mode

Talk switching

C.WTG options

Chnge language

You can program the following function items

using the handset near

the base unit

. The display shows the programming instructions. See the

corresponding pages for function details.

Make sure the handset is in the standby mode initially.

During programming:

*To select a desired function item, press

repeatedly until the

arrow points to the item. Then press

FWD/EDIT

to go to the next step.

•

You can exit the programming mode any time by pressing

(FUNCTION/EXIT/CH)

•

If you do not press any buttons for 60 seconds, the unit will return to the standby
mode.

•

If the handset has lost communication with the base unit, 3 beeps sound and “

link to base Place on cradle and try again.

” is displayed.

Press

(FUNCTION/EXIT/CH)

<Function menu>*

To store an item in the directory (p. 35).

To select the ringer volume (p. 19).

To select the LCD contrast (p. 20).

Press

FWD/EDIT

To store a phone number in the DIRECT button
(p. 32).

To select the flash time (p. 49).

To store a voice mail access number (p. 42).

To set the voice mail tone (p. 43).

To select the line mode (p. 16).

To select the dialing mode (p. 15).

To set the auto talk feature (p. 18).

To select the “C.WTG (Call Waiting) options”
mode (p. 46).

To select the display language (p. 14).

Save directory

Ringer volume

Program

LCD contrast

<Function menu>*

Summary of Contents for KX-TG2551CS





























































Search results

Summary of Contents for KX-TG2551CS

Reviews:

Related manuals for KX-TG2551CS

Brands by name

Popular brands

Panasonic KX-TG2551CS, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2551CS

Reviews:

Related manuals for KX-TG2551CS

Brands by name

Popular brands