Panasonic KX-TG2551CS Operating Instructions Manual Download

Page: 26 / 60

Using the Caller List

Lift the handset off the base unit
and press

to enter the

Caller List.

•

The display will show, for example,
the following.

•

You can go to the directory list by
pressing

FWD/EDIT

(p. 38).

To search from the most
recent call, press

To search from the oldest
call, press

•

To scroll between callers,
press

To exit the list, press

(FUNCTION/EXIT/CH)

•

The handset will return to the
standby mode.

2 new callers

=Directory

•

Once new calls have been checked, “

√

” will be added.

•

If “

No items stored

” is displayed, the Caller List is empty.

•

If more than one call is received from the same caller, the date and time of the
last call will be recorded. If the same caller calls again, the call entry with “

√

” will

be deleted.

Viewing the Caller List

To check who has called, follow the steps below.

Make sure the handset is in the standby mode initially.

(FUNCTION/EXIT/CH)

Summary of Contents for KX-TG2551CS





























































Search results

Summary of Contents for KX-TG2551CS

Reviews:

Related manuals for KX-TG2551CS

Brands by name

Popular brands

Panasonic KX-TG2551CS, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2551CS

Reviews:

Related manuals for KX-TG2551CS

Brands by name

Popular brands