Panasonic kx-tg2352 Operating Instructions Manual Download | Manualshive

Page: 70 / 72

background image

70

THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED
WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR
ARISING OUT OF ANY BREACH OF THIS WARRANTY.

(As examples, this excludes

damages for lost time, lost calls or messages, cost of having someone remove or re-install
an installed unit if applicable, travel to and from the servicer. The items listed are not
exclusive, but are for illustration only.)

ALL EXPRESS AND IMPLIED WARRANTIES,

INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD
OF THE LIMITED WARRANTY.

Some states do not allow the exclusion or limitation of incidental or consequential damages,
or limitations on how long an implied warranty lasts, so the exclusions may not apply to you.

This warranty gives you specific legal rights and you may also have other rights which vary
from state to state. If a problem with this product develops during or after the warranty
period, you may contact your dealer or Servicenter. If the problem is not handled to your
satisfaction, then write to the warrantor’s Consumer Affairs Department at the addresses
listed for the warrantor.

PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY,
ARE YOUR RESPONSIBILITY.

Customer Services Directory

For Product Information, Operating Assistance, Literature Request,
Dealer Locations, and all Customer Service inquiries please contact:
1-800-211-PANA (7262), Monday-Friday 9 am-9 pm; Saturday-
Sunday 9 am-7 pm, EST.
or send e-mail :
[email protected]

For hearing or speech impaired TTY users, TTY : 1-877-833-8855

Web Site: http://www.panasonic.com
You can purchase parts, accessories or locate your
nearest servicenter by visiting our Web Site.

Accessory Purchases:

1-800-332-5368 (Customer Orders Only)
For hearing or speech impaired TTY users, TTY : 1-866-605-1277
Panasonic Services Company 20421 84th Avenue South, Kent, WA 98032
(6 am to 5 pm Monday - Friday; 6 am to 10:30 am Saturday; PST)
(Visa, MasterCard, Discover Card, American Express, Check)

Service in Puerto Rico

Matsushita Electric of Puerto Rico, Inc. Panasonic Sales Company/
Factory Servicenter:

Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park,

Carolina, Puerto Rico 00985

Phone (787)750-4300

Fax (787)768-2910

«
...
68
69
70
71
72
»

Summary of Contents for kx-tg2352









































































Reviews:

No comments

Related manuals for kx-tg2352

Brand: Panasonic Pages: 10

Brand: VTech Pages: 25

Brand: Uniden Pages: 22

Brand: GAI-Tronics Pages: 8

Brand: Jabra Pages: 8

Brand: switel Pages: 88

Brand: GE Pages: 9

Brand: Motorola Pages: 30

Brand: Motorola Pages: 156

Brand: Motorola Pages: 13

T505 - MOTOROKR - Speaker Phone

Brand: Motorola Pages: 108

Brand: Motorola Pages: 56

Brand: Motorola Pages: 37

Brand: Motorola Pages: 50

Brand: Motorola Pages: 66

Brand: Motorola Pages: 107

Brand: Motorola Pages: 143

Brand: Motorola Pages: 88

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands