Panasonic kx-tg2352 Operating Instructions Manual Download

Page: 17 / 72

Preparation

For assistance, please call: 1-800-211-PANA(7262)

Ringer volume
Low

High

=Save

Ringer volume

Low

High

Ringer Volume

You can program the handset ringer volume to HIGH, MEDIUM, LOW or
OFF. If set to OFF, the handset will not ring for external calls, and for
internal calls it will ring at the LOW level. Your phone comes from the
factory set to HIGH.

Make sure the unit is not being used and the handset is lifted off the
base unit.

Press

(MUTE/FUNCTION)

Scroll to “

Ringer setting

” by

pressing

, and press

Press

at “

Ringer volume

”.

Select the desired volume by
pressing

•

Each time you press

, the

volume will change and ring.

•

To turn the ringer OFF:

press

repeatedly until “

Off ?

” is

displayed.

Press

(

Save

key).

•

A beep sounds.

To turn the ringer ON:

Press

in step 4.

•

The ringer will sound at the LOW level.

•

You can exit the programming mode any time by pressing

(OFF)

•

If set to OFF, “

Ringer off

” will be displayed while the handset is not in use.

•

If you have received new calls, “

Ringer off

” will not be displayed but

“

Received calls

” will be displayed while the handset is not in use.

“

Ringer off

” will be displayed for about 5 seconds after completing operations

or lifting the handset from the base unit or the charger.

•

You can also select the ringer volume while an external call is being received.
Press

while the handset is just ringing.

•

You can change the ringer tone for external calls. See page 49.

HIGH

MEDIUM

OFF

Ringer volume

Low

High

Ringer volume

Off ?

LOW

V.M. access

Ringer setting
Initial set

--------------

Ringer volume
Ringer tone

Summary of Contents for kx-tg2352









































































Search results

Summary of Contents for kx-tg2352

Reviews:

Related manuals for kx-tg2352

Brands by name

Popular brands

Panasonic kx-tg2352, Operating Instructions Manual

Search results

Summary of Contents for kx-tg2352

Reviews:

Related manuals for kx-tg2352

Brands by name

Popular brands