26
Day and Time
Voice Day/Time Stamp:
During playback, a synthesized voice will
announce the day and time that each message was recorded.
Ringer pattern
H
Program
--------------
--------------
H
TAD program
Set flash time
--------------
H
Day and time
Remote code
1
Press
(FUNCTION/2WAY!REC)
.
2
Scroll to “
Program
” by pressing
Ö
or
Ñ
.
3
Press
á
.
4
Press
á
at “
TAD program
”.
5
Press
á
at “
Day and time
”.
•
“
Set time
” is announced from the base unit.
If previously adjusted, the day/time will be heard.
6
Enter the current time (hour and minute)
using a 4-digit number.
(Ex. To set 9:30, enter “0930”.)
7
Press
(*)
to select “AM” or “PM”.
Press
(#)
repeatedly to set the day.
8
Press
á
(
Save
key).
•
The base unit announces the day/time. The clock
starts working.
•
If 6 beeps sound from the base unit, the setting is
not correct. Start again from step 5.
•
To exit the programming mode, press
(OFF)
.
SUN 12:00 AM
#=Day 0-9=Time
=AM/PM
H
=Save
SUN 09:30 AM
#=Day 0-9=Time
=AM/PM
H
=Save
MON 09:30 AM
#=Day 0-9=Time
=AM/PM
H
=Save
Preparing the Answering System
•
You can exit the programming mode any time by pressing
(OFF)
.
•
In step 6, you cannot enter numbers greater than 12.
Do not use military time.
(To set 13:00 hours, enter “0100”, and select “PM” by pressing
(*)
.)
MON 09:30 AM
Make sure the unit is not being used and the handset is lifted off the
base unit.
Summary of Contents for KX-TG2257S - 2.4 GHz Digital Cordless...
Page 95: ......
