Panasonic KX-TG2257S - 2.4 GHz Digital Cordless... Page 10 Operating Instructions Manual Download

Page: 10 / 96

Displays

Please lift up
and try again.

The handset has lost communication with the
base unit. Place the handset on the base unit
and try again.

This is a name from the Caller List.
The display shows:
— the caller’s name,
— the caller’s number,
— the time and date of the last call

(ex. Jan. 10, 11:20 AM), and

— the number of times called (ex. 3 times).

This is a name from the directory. The stored
name and phone number are displayed.

A second call is received during a conversation
(p. 58).

was pressed while the

handset was on the base unit. Lift the handset
and press the button again.

While the base unit was in use,

was

pressed to search the Caller List/directory list,

was pressed to select an option or

(HOLD/INTERCOM/CLEAR)

was pressed.

SMITH,JACK
1-222-333-4444
11:20A JAN10

Ann
123-456-7890

BROWN,NANCY
1-555-666-7777
----Waiting----

Not available

No link to base
Place on cradle
and try again.

Summary of Contents for KX-TG2257S - 2.4 GHz Digital Cordless...

































































































Search results

Summary of Contents for KX-TG2257S - 2.4 GHz Digital Cordless...

Reviews:

Related manuals for KX-TG2257S - 2.4 GHz Digital Cordless...

Brands by name

Popular brands

Panasonic KX-TG2257S - 2.4 GHz Digital Cordless..., Operating Instructions Manual

Search results

Summary of Contents for KX-TG2257S - 2.4 GHz Digital Cordless...

Reviews:

Related manuals for KX-TG2257S - 2.4 GHz Digital Cordless...

Brands by name

Popular brands