Panasonic KX-TG2257S - 2.4 GHz Digital Cordless..., Operating Instructions Manual

Page: 21 / 96

21
Preparation
For assistance, please call: 1-800-211-PANA(7262)
Ringer Pattern
You can select the handset or the base unit ringer pattern out of 6
patterns. When an incoming call is being received, the unit rings in the
selected pattern.
Your phone comes from the factory set to 1.
Make sure the unit is not being used and the handset is lifted off the
base unit.
With the handset
1 Press
(FUNCTION/2WAY!REC) .
2 Scroll to “
Ringer pattern
” by pressing
Ö
or
Ñ
.
3 Press
á
.
•
The current setting is displayed.
4 Select the desired ringer pattern by
pressing
Ö
or
Ñ
.
•
Each time you press Ö or Ñ , the ringer
pattern will change and ring.
•
You can also select the ringer pattern by
pressing dialing buttons
(1)
to
(6) .
•
If you set the ringer volume to OFF, the
handset will not ring (p. 20).
5
Press
á
(
Save
key).
•
A beep sounds.
•
To exit the programming mode, press (OFF) .
•
You can exit the programming mode any time by pressing (OFF)
.
With the base unit
1 Press
(MUTE/RINGER)
.
•
The base unit rings at the current setting.
2 Within 5 seconds, select the desired ringer pattern by pressing
dialing buttons
(1) to (6) .
•
Each time you press the buttons, the ringer pattern will change and ring.
Ringer volume
H
Ringer pattern
Program
Ringer pattern
:1
GF H
=Save
Ringer pattern
:3
GF H
=Save
Ringer pattern
:3