Panasonic KX-TG2214W Operating Instructions Manual Download | Manualshive

Page: 44 / 56

background image

Important Safety Instructions

44

CAUTION:

To reduce the risk of fire or injury to persons, read and follow these instructions.

1. Use only the battery(ies) specified.
2. Do not dispose of the battery(ies) in a fire. They may explode. Check with local

waste management codes for special disposal instructions.

3. Do not open or mutilate the battery(ies). Released electrolyte is corrosive and

may cause burns or injury to the eyes or skin. The electrolyte may be toxic if
swallowed.

4. Exercise care in handling batteries in order not to short the battery to

conductive materials such as rings, bracelets, and keys. The battery and/or
conductor may overheat and cause burns.

5. Charge the battery(ies) provided with or identified for use with this product only

in accordance with the instructions and limitations specified in this manual.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR ANY TYPE OF MOISTURE.

• The AC adaptor is used as the main disconnect device, ensure that the AC outlet

is located/installed near the unit and is easily accessible.

«
...
42
43
44
45
46
...
»

Summary of Contents for KX-TG2214W

























































Reviews:

No comments

Related manuals for KX-TG2214W

Brand: Jabra Pages: 2

Brand: D-Link Pages: 67

Brand: NEC Pages: 12

NEC Dterm Series E

Brand: NEC Pages: 44

Brand: NEC Pages: 11

Brand: NEC Pages: 4

UNIVERGE UM8500

Brand: NEC Pages: 3

Brand: Uniden Pages: 27

Brand: Radio Shack Pages: 20

CONVERSip Edge 300

Brand: Vertical Pages: 48

Brand: Evolveo Pages: 27

Brand: Uniden Pages: 68

Brand: Clas Ohlson Pages: 2

Brand: AGFEO Pages: 84

Brand: Qwest Pages: 46

Brand: france telecom Pages: 31

Brand: Denver Pages: 27

Brand: Parkside Performance Pages: 105

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands