Panasonic KX-TG2214W Operating Instructions Manual Download

Page: 40 / 56

Troubleshooting

Problem

Cause & Remedy

The unit does not work.

• Check the settings (p. 8–9).
• Check whether the dialing mode setting is

correct (p. 12).

• Charge the battery fully (p. 8).
• Clean the charge contacts and charge again

(p. 9).

• Install the battery properly (p. 8).
• Place the handset on the base unit and unplug

the AC adaptor to reset it. Plug in, and try again.

• Re-install the battery (p. 8) and charge it fully.

“

No link to base.

Place on cradle and

try again.

” is displayed

and an alarm tone sounds.

• You are too far from the base unit. Walk closer

and try again.

• Place the handset on the base unit and try

again.

• Plug in the AC adaptor.
• Raise the base unit antenna.

Static, sound cuts in/out,
fades. Interference from
other electrical units.

• Move the handset and the base unit away from

other electrical appliances (p. 3).

• Walk closer to the base unit.
• Raise the base unit antenna.
• Select a clearer channel (p. 18).

The handset does not ring.

• The ringer volume is set to OFF. Set to HIGH,

MEDIUM or LOW (p. 15).

The handset display is
blank.

• Charge the battery fully (p. 8).

You cannot program
function items.

• Programming is not possible while the unit is

being used.

• Do not pause for over 60 seconds while

programming.

• Walk closer to the base unit.

While programming or
searching, the unit starts to
ring and stops the
program/search.

• A call is coming in. To answer the call, press

[

]

[

]

. Start again from the beginning after

hanging up.

Summary of Contents for KX-TG2214W

























































Search results

Summary of Contents for KX-TG2214W

Reviews:

Related manuals for KX-TG2214W

Brands by name

Popular brands

Panasonic KX-TG2214W, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2214W

Reviews:

Related manuals for KX-TG2214W

Brands by name

Popular brands