Panasonic KX-TG2214W Operating Instructions Manual Download Page 46 | Manualshive

Page: 46 / 56

background image

FCC and Other Information

46

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.

Privacy of communications may not be ensured when using this phone.

CAUTION:

Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this device.

Note:

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

— Consult the dealer or an experienced radio/TV technician for help.

Some cordless telephones operate at frequencies that may cause interference to
nearby TVs and VCRs. To minimize or prevent such interference, the base of the
cordless telephone should not be placed near or on top of a TV or VCR. If
interference is experienced, move the cordless telephone further away from the TV
or VCR. This will often reduce, or eliminate, interference.

Operating near 2.4GHz electrical appliances may cause interference. Move away
from the electrical appliances and/or press the TALK or SP-PHONE button, or CH
(Channel) key.

CAUTION:

To comply with FCC RF exposure requirements, the base unit should be installed
with its antenna located at 20 cm or more from persons and handset should be
carried with the specific belt-clip provided for the handset to ensure compliance.
Other non-tested belt-clips or similar body-worn accessories may not comply,
therefore, should be avoided.

This equipment is hearing aid compatible as defined by the FCC in 47 CFR Section
68.316.

«
...
44
45
46
47
48
...
»

Summary of Contents for KX-TG2214W

























































Reviews:

No comments

Related manuals for KX-TG2214W

Brand: Samsung Pages: 8

Brand: 3Com Pages: 128

Brand: GE Pages: 2

Brand: GE Pages: 2

Brand: GE Pages: 100

Brand: Uniden Pages: 12

Brand: NEC Pages: 12

NEC Dterm Series E

Brand: NEC Pages: 44

Brand: NEC Pages: 11

Brand: NEC Pages: 4

UNIVERGE UM8500

Brand: NEC Pages: 3

Brand: Panasonic Pages: 5

Brand: Panasonic Pages: 4

Brand: Panasonic Pages: 24

Brand: Panasonic Pages: 42

Brand: Panasonic Pages: 135

Brand: Panasonic Pages: 23

Brand: Radio Shack Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands