Useful Information
27
Caller ID
Liquid damage
Vigyázat:
L
To avoid permanent damage, do not use a microwave oven to speed up the drying process.
Problem
Cause/solution
Caller information is not displayed.
L
You must subscribe to a Caller ID service. Contact your
service provider/telephone company for details.
L
If your unit is connected to any additional telephone
equipment, remove and plug the unit directly into the wall
jack.
L
If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base unit and
the telephone line jack. Contact your DSL/ADSL provider
for details.
L
Other telephone equipment may be interfering with this
unit. Disconnect the other equipment and try again.
Caller information is slow to display.
L
Depending on your service provider/telephone company,
the unit may display the caller’s information at the 2nd ring
or later.
L
Move closer to the base unit.
Time on the unit has shifted.
L
Incorrect time information from incoming Caller ID
changes the time. Set the time adjustment to
“
Manuális
”
(off) (16. oldal).
Problem
Cause/solution
Liquid or other form of moisture has
entered the handset/base unit.
L
Disconnect the AC adaptor and telephone line cord from
the base unit. Remove the batteries from the handset and
leave to dry for at least 3 days. After the handset/base unit
are completely dry, reconnect the AC adaptor and
telephone line cord. Insert the batteries and charge fully
before use. If the unit does not work properly, contact an
authorised service centre.
TG161x_171xHG(e-hg).book Page 27 Monday, February 21, 2011 11:46 AM
