Useful Information
26
Programmable settings
Battery recharge
Making/answering calls, intercom
*1 KX-TG1612
Problem
Cause/solution
The display is in a language I cannot
read.
L
Change the display language (12. oldal).
Problem
Cause/solution
The handset beeps and/or
8
displays.
L
Battery needs charging. Fully charge the batteries (9.
oldal).
I fully charged the batteries, but
– battery level does not increase or
– the operating time seems to be
shorter.
L
Clean the battery ends (
S
,
T
) and the charge contacts
with a dry cloth and charge again.
L
It is time to replace the batteries (9. oldal).
Problem
Cause/solution
w
is flashing.
L
The handset is too far from the base unit. Move closer.
L
The base unit’s AC adaptor is not properly connected.
Reconnect AC adaptor to the base unit.
L
The handset is not registered to the base unit. Register it
(28. oldal).
Noise is heard, sound cuts in and out.
L
You are using the handset or base unit in an area with high
electrical interference. Re-position the base unit and use
the handset away from sources of interference.
L
Move closer to the base unit.
L
If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base unit and
the telephone line jack. Contact your DSL/ADSL provider
for details.
L
Unplug the base unit’s AC adaptor to reset the unit and
turn off the handset. Reconnect the adaptor, turn on the
handset and try again.
The handset does not ring.
L
The ringer volume is turned off. Adjust ringer volume (13.
oldal).
I cannot make a call.
L
The dialling mode may be set incorrectly. Change the
setting (12. oldal).
L
The handset is too far from the base unit. Move closer and
try again.
L
Another unit is in use.
*1
Wait and try again later.
TG161x_171xHG(e-hg).book Page 26 Monday, February 21, 2011 11:46 AM
