Useful Information
25
Error messages
The displays with abbreviation are rephrased with [
].
Troubleshooting
If you still have difficulties after following the instructions in this section, disconnect the base unit’s AC
adaptor and turn off the handset, then reconnect the base unit’s AC adaptor and turn on the handset.
General use
*1 KX-TG1611/KX-TG1711
Display message
Cause/solution
Memória tele
[Memory full]
L
The phonebook memory is full. Erase unwanted entries (15. oldal).
Problem
Cause/solution
The handset does not turn on even after
installing charged batteries.
L
Place the handset on the base unit or charger to turn on
the handset.
The unit does not work.
L
Make sure the batteries are installed correctly (9. oldal).
L
Fully charge the batteries (9. oldal).
L
Check the connections (8. oldal).
L
Unplug the base unit’s AC adaptor to reset the unit and
turn off the handset. Reconnect the adaptor, turn on the
handset and try again.
L
Remove the batteries from the handset and install again.
L
The handset has not been registered to the base unit.
Register the handset (28. oldal).
The handset display is blank.
L
The handset is not turned on. Turn the power on (12.
oldal).
I cannot hear a dial tone.
L
Make sure that you are using the supplied telephone line
cord. Your old telephone line cord may have a different
wiring configuration.
L
The base unit’s AC adaptor or telephone line cord is not
connected. Check the connections.
L
Disconnect the base unit from the telephone line and
connect the line to a known working telephone. If the
working telephone operates properly, contact our service
personnel to have the unit repaired. If the working
telephone does not operate properly, contact your service
provider/telephone company.
I cannot use the intercom feature.
*1
L
This feature is shared between the handsets. Although the
handset displays
“
Bels
ő
hívás
”
, this feature is not
available for this model.
TG161x_171xHG(e-hg).book Page 25 Monday, February 21, 2011 11:46 AM