Panasonic KX-TDE200GR, Service Manual

Page: 40 / 132

40
KX-TDE200GR
8.1.1.10. Utility-T1 Signaling Bit Monitor
Displays reference signaling bit information for all channels of the T1 card, by monitoring sent and received A, B, C and D bits.
This utility is intended for use by dealers.
This option is only available at Installer level, and requires that the target T1 card be set to INS status.
While monitoring is being performed, any displayed bits whose value changes from 0 to 1 or vice versa will be highlighted in red
until the next screen refresh is performed.
To view signaling bit information
1. From the Utility menu, select T1 Signaling Bit Monitor.
2. From the Slot No drop-down list, select the target slot.
3. From the Interval Timer drop-down list, select the number of seconds between each automatic screen refresh.
4. Click Start.
Trace information will be displayed. The information is automatically updated whenever the data being monitored changes.
5. Click Stop to end the trace.
6. Select an option:
• Click Capture to save the displayed trace information.
Information is saved as a text-format file.
• Click Clear to erase the information.
8.1.1.11. Utility-ISDN/QSIG Protocol Trace
This utility collects protocol trace data from PRI or IP-GW cards, and displays it on the PC.
This option is only available at Installer level, and requires that the target PRI or IP-GW card be set to INS status.
Protocol trace data is continually accumulated on ISDN and IP-GW cards, and 3 types of data can be downloaded:
• Real Time Trace: Pseudo-real-time data is collected through data polling at one-second intervals. The displayed information is
updated beginning when the Start button is clicked.
• Accumulation Trace: Previously accumulated data is retrieved and displayed.
• Error Accumulation Trace: Previously accumulated error data is retrieved and displayed. This trace shows the data snapshot that
is taken just before a card resets.
To view trace data
1. From the Utility menu, select ISDN/QSIG Protocol Trace.
2. From the Slot No drop-down list, select the target slot.
3. From the Trace Data Type drop-down list, select the type of data to view.
4. Click Start.
Trace information will be displayed.
5. Select an option:
• Click Capture to save the displayed trace information.
• Click Clear to clear the screen display.
6. Click Cancel to return to the main screen.
8.1.1.12. Utility-V-IPGW16 Protocol Trace
This utility collects trace data of protocol activity from V-IPGW16 card.
This option is only available at Installer level, and requires that the target V-IPGW16 card be set to INS status.
To save trace data
• From the Utility menu, select V-IPGW16 Protocol Trace.
When the progress bar disappears, the protocol trace is complete. The trace data has been saved to the SD Memory Card.
To view trace data
• From the Utility menu, select File Transfer PBX (SD Card) to PC.
The trace data will be displayed.