manualshive.com logo in svg

Panasonic KX-TDE100, Pc Programming Manual

The Panasonic KX-TDE100 is a versatile communication system that offers advanced features and flexibility for businesses. To make the most out of this product, it's essential to have the User Manual. Download the free manual from our website and explore the full potential of your Panasonic KX-TDE100.

Share
Download
background image

12.7  [10-5] Miscellaneous

The Intercept Routing feature can activate when the destination of an incoming call is unavailable, or when
there is no destination for the call, to reroute the call to an alternate destination.

Intercept—Intercept Routing - DND (Destination sets DND.)

Enables the Intercept Routing—DND feature to activate when the original destination is in DND mode.

Value Range

Disable (Busy Tone): Sends a busy tone to the caller. (However, a call through an LCOT or T1 [LCOT/
GCOT] card will ring at the original destination while the caller hears a ringback tone.)
Enable: Redirects the call to the intercept destination

Maintenance Console Location

12.7  [10-5] Miscellaneous

Programming Manual References

None

Feature Guide References

1.1.1.6  Intercept Routing
1.3.1.3  Do Not Disturb (DND)

Intercept—Routing to Operator - No Destination (Destination is not

programmed.)

Enables the Intercept Routing—No Destination feature to activate when there is no destination for the call.
(The Intercept Routing—No Destination feature always works for calls through an LCOT or T1 [LCOT/GCOT]
card, even when this feature is disabled.)

Value Range

Disable (Reorder Tone): Sends a reorder tone to the caller
Enable: Redirects the call to an operator

Maintenance Console Location

12.7  [10-5] Miscellaneous

Programming Manual References

None

Feature Guide References

1.1.1.7  Intercept Routing—No Destination

900

PC Programming Manual

12.7 [10-5] Miscellaneous

Summary of Contents for KX-TDE100























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for KX-TDE100

Yeastar Technology S20 Extension User Manual preview
S20
Brand: Yeastar Technology Pages: 14
Kerio Operator Box 1000 Series Quick Installation Manual preview
Operator Box 1000 Series
Brand: Kerio Pages: 4

Brands by name

Popular brands

Load more brands