Panasonic KX-TDE100, Pc Programming Manual

Page: 19 / 982

6. a.
Select your PBX model from PBX Model .
b.
Select the LAN or RS-232C tab, depending on the type of PC connection with the PBX.
c.
Specify the settings as required. (See 2.1.1 Starting Maintenance Console and Software
Modes )
Note
When connecting to the PBX for the first time selecting LAN , the IP Address and Port
Number must be set to 192.168.0.101 and 35300 respectively.
d.
Enter the system password for installer (default: 1234 ).
e.
Click Connect .
7. When country/area data do not match:
a.
Click OK to replace the country/area data of the PBX. Replacement may take several minutes to
complete.
b.
Follow the procedure described in Section 3.16.1 Starting the PBX (for KX-TDE100/KX-TDE200)
or Section 3.18.1 Starting the PBX (for KX-TDE600) in the Installation Manual and restart the PBX.
c.
Repeat step 5 to reconnect the Maintenance Console to the PBX.
8. Follow the instructions of the Quick Setup wizard for the basic items in Quick Setup—Step 1 to 3.
9. In Quick Setup—Step 4, the IP addressing information for the IPCMPR/IPCEMPR card can be assigned
automatically through a DHCP server or entered manually.
When using a DHCP server:
a.
Select Enable for the DHCP Client setting.
b.
Click Apply .
Note
The boxes will turn grey and the IP addresses will
be assigned automatically after the PBX is reset.
When not using a DHCP server:
a.
Select Disable for the DHCP Client setting.
b.
For KX-TDE100/KX-TDE200, type the IP address of the
IPCMPR card in the
IP Address for IPCMPR Card box.
For KX-TDE600, type the IP address of the IPCEMPR
card in the
IP Address for IPCEMPR Card box.
*1
c.
In the IP Address for VoIP-DSP box, type the IP
address of the DSP16 or DSP64 card.
*2
d.
In the Subnet Mask box, type the subnet mask address
of the network.
*3
e.
In the Default Gateway box, type the IP address of the
default gateway.
*4
f.
Click Apply .
10. Follow the instructions of the Quick Setup wizard in Quick Setup.
The system menu appears. You may now begin programming the PBX.
Notice
•
Do not change the IP addresses of the IPCMPR/IPCEMPR and DSP cards once IP telephones are
registered to the PBX using these IP addresses.
PC Programming Manual 19
1.2.1 Installing and Starting the Maintenance Console