Panasonic KX-TDE100, Pc Programming Manual

Page: 777 / 982

6.17 [4-3] DSS Console
A DSS Console can be used in conjunction with a PT. A maximum of 8 (with the KX-TDE100/KX-TDE200) or
64 (with the KX-TDE600) DSS Consoles can be programmed. The
DPT Type—Type of the extension port
that DSS Console is connected must be set to DSS in 3.21 [1-1] Slot—Port Property - Extension Port .
Each flexible DSS button can be customised to access a certain feature. A maximum of 66 flexible DSS buttons
can be customised for each DSS Console. Select the desired DSS Console from the
DSS Console No. list.
To copy DSS Console setting values from one location to another, click the Copy to button.
For more information on flexible buttons, see "1.20.2 Flexible Buttons" in the Feature Guide.
Pair Extension
Specifies the extension number of the PT to be used in pair with the DSS Console.
Note that if one or more SDN buttons have been set at the DSS Console, they must be deleted before this
setting can be changed.
Value Range
None, Max. 5 digits (consisting of 0–9)
Maintenance Console Location
6.17 [4-3] DSS Console
Programming Manual References
None
Feature Guide References
None
Type
Specifies the feature to be assigned to the flexible DSS button.
Value Range
Not Stored, Loop CO, Single CO, Group CO, DSS, One-touch, ICD Group, Message Waiting, FWD/DND
(Both), FWD/DND (External), FWD/DND (Internal), Group Fwd (Both), Group Fwd (External), Group Fwd
(Internal), Account, Conference, Terminate, EFA, Charge, Call Park, Call Log, Log-in/Log-out, Hurry-up,
Wrap-up, System Alarm, Time Service, Answer, Release, TRS Level Change, ISDN Service, CLIR, COLR,
ISDN Hold, Headset, Time Service - Automatic/Manual, Check In, Check Out, Cleaned Up (KX-TDE600 only),
Two-way Record, Two-way Transfer, LCS, Voice Mail Transfer, NDSS, CTI, SDN
Maintenance Console Location
6.17 [4-3] DSS Console
Programming Manual References
6.18 [4-3] DSS Console—DSS key data copy
PC Programming Manual 777
6.17 [4-3] DSS Console