Panasonic KX-TDA50 Operating Manual Download

Page: 24 / 214

TRANSFER

TRANSFER:

Used to transfer a call to another
party.

HOLD

HOLD:

Used to place a call on hold.

FLASH/

RECALL

FLASH/RECALL:

Used to disconnect the current
call and make another call
without hanging up.
This button can also be used as
a CANCEL button while on-hook.

CONF

CONF (Conference):

Used to establish a multiple party
conversation.

VOICE CALL

MUTE

VOICE CALL/MUTE:

Used to monitor an intercom call
automatically, but it cannot be
used for hands-free
conversations. It also mutes the
handset microphone during a
conversation.

FWD/DND

Call Forwarding (FWD)/Do Not
Disturb (DND):

Used to perform Call Forwarding (FWD)
or Do Not Disturb (DND).

PROGRAM

PROGRAM:

Used to enter and exit the
Programming mode.

ANSWER

ANSWER:

Used to answer an incoming call.

RELEASE

RELEASE:

Used to disconnect the line.

VOL

Navigator Key/Jog Dial/Volume
Key:

Used to adjust the volume and the
display contrast or select desired items.

Operating Manual

Document Version 2008-10

1.1.1 Before Operating the Telephones

Summary of Contents for KX-TDA50























































































































































































































Search results

Summary of Contents for KX-TDA50

Reviews:

Related manuals for KX-TDA50

Brands by name

Popular brands

Panasonic KX-TDA50, Operating Manual

Search results

Summary of Contents for KX-TDA50

Reviews:

Related manuals for KX-TDA50

Brands by name

Popular brands