background image

Problem

Remedy

A reorder tone is audible or "Restricted" is
displayed.

The telephone is locked.

 Unlock your telephone. (

 1.3.24  Extension Dial

Lock, 2.1.5  Remote Extension Dial Lock)

Toll restriction is activated.

 Consult your manager.

An account code is required.

 (

 1.3.2  Account

Code Entry, 1.3.66  Verification Code Entry,
1.3.72  Walking COS)

I cannot make an outside call using the
One-touch Dialing button or speed dialing.

A line access number was not stored.

 A line access number is required for outside calls.

(

 1.2.1  Making Calls, 3.1.4  Customizing the

Buttons)

I cannot remember the feature numbers.

 If the feature numbers have been changed from the

default values, write the new feature numbers in the
table in "4.2.1  Feature Number Table".

 Ask your dealer to change the feature numbers for

easier use.

While talking to an outside party, the line is
disconnected.

The time limit has run out.

 (

 1.3.11  Call

Transfer, 1.3.16  Conference, Unattended)

 Consult your dealer to extend the time limit, if

necessary.

Redialing does not function.

The stored number was more than 32 digits or an
extension number.

 (

 1.3.58  Redial, Last Number)

I cannot have a conversation using the
Bluetooth headset.

 Make sure that the headset is properly registered

to the module.

 Make sure that the headset is properly charged

according to the manual of the headset.

 Remove the wired headset from the headset jack.

Priority is given to the wired headset when both are
connected.

I cannot register, de-register, or confirm the
ID of the Bluetooth headset.

 Make sure that the module is properly installed in

the IP-PT/DPT.

The PC and fax machine communication
failed.

An indication tone may have interrupted
communication.

 (

 1.3.17  Data Line Security)

I do not want to show my telephone number
to the calling or called party’s telephone.

(

 1.3.53  Private Network Features—CLIR (Calling

Line Identification Restriction), 1.3.55  Private Network
Features—COLR (Connected Line Identification
Restriction))

I want to show my telephone number to the
calling or called party’s telephone.

(

 1.3.52  Private Network Features—CLIP (Calling

Line Identification Presentation), 1.3.54  Private
Network Features—COLP (Connected Line
Identification Presentation))

Document Version  2008-10  

Operating Manual

189

4.1.1 Troubleshooting

Summary of Contents for KX-TDA50























































































































































































































Reviews: