Panasonic KX-TDA100D, Installation Manual

Page: 27 / 156

Power Supply Unit Capacity
Calculate the load figure from the type and number of items of equipment to be connected.
Load Figure Calculation
Equipment Type Load Figure
PT KX-DT300 series DPT/KX-DT300 series DSS
console/KX-T7600 series DPT/KX-T7600 series
DSS console 1
IP-PT 0
Trunk Card DID8 16
E&M8 8
Others 0
Extension Card
*1
MCSLC16 16
MCSLC24 24
CS (1 unit) 4
PT-interface CS (1 unit) 4
PT-interface CS (High-density) (1 unit) 8
ISDN Extension 2
VPS (1 port) 1
*1 Only the extension cards that can support SLTs count for the load figures.
Maximum Load Figure
The pre-installed power supply unit (PSU) supports the following load figures.
System Equipment Maximum Load Figure
Any Equipment 104
Additional Load Capacity for a MCSLC16/
MCSLC24 Card 24
Total 128
In addition to any combination of equipment totalling a load figure of up to 104, one additional MCSLC16 card
(load figure: 16) or one MCSLC24 card (load figure: 24) may also be added, for a total load figure of up to 128.
Installation Manual 27
1.3.3 System Capacity