Panasonic KX-TDA100 KX-TDA200 Installation Manual Download

Page: 77 / 194

2.4 Installation of the CO Line Cards

Installation Manual

2.4.4

PRI23 Card

Function

1-port ISDN Primary Rate Interface card (23B channels). NI (North American standard ISDN protocol)
compliant.

Accessory and User-supplied Items

Accessory (included):

none

User-supplied (not included):

RJ45 connector

Notes

•

Connect this optional service card to the CO line through an NT1; do not connect to the U interface
of the CO line directly.

•

To confirm the CO line connection, refer to "Confirming the CO Line Connection" in "2.12.1 Starting
the Hybrid IP-PBX".

CAUTION

PRI ports are SELV ports and should only be connected to SELV services.

Switch Settings

Switch

Type

Usage and Status Definition

A/B

Slide

Keep the switch at default A position. Do not change the position of this
switch.

LEDs

RJ45

NT1

Summary of Contents for KX-TDA100 KX-TDA200



































































































































































































Search results

Summary of Contents for KX-TDA100 KX-TDA200

Reviews:

Related manuals for KX-TDA100 KX-TDA200

Brands by name

Popular brands

Panasonic KX-TDA100 KX-TDA200, Installation Manual

Search results

Summary of Contents for KX-TDA100 KX-TDA200

Reviews:

Related manuals for KX-TDA100 KX-TDA200

Brands by name

Popular brands