Panasonic KX-TDA100 KX-TDA200 Installation Manual Download Page 122

Page: 122 / 194

2.8 Connection of 2.4 GHz Portable Stations

122

Installation Manual

4. Finish the site survey

Refer to "2.8.6 After Site Survey".

Return all DIP switches of each CS to the OFF position, and stop supplying electricity.

Turn off the PS.

5. Connect the CS and PS to the Hybrid IP-PBX and test the operation

Refer to "2.8.7 Connecting a Cell Station to the Hybrid IP-PBX".

Connect the CSs to the Hybrid IP-PBX.

Walk around the service area while having a conversation using a registered PS. If noise is
frequent or conversations disconnect, relocate the CSs or install an additional CS.

6. Mount the CS on the wall

Refer to "2.8.8 Wall Mounting".

If everything assuredly goes as planned, mount the CS on the wall.

Summary of Contents for KX-TDA100 KX-TDA200



































































































































































































Search results

Summary of Contents for KX-TDA100 KX-TDA200

Reviews:

Related manuals for KX-TDA100 KX-TDA200

Brands by name

Popular brands

Panasonic KX-TDA100 KX-TDA200, Installation Manual

Search results

Summary of Contents for KX-TDA100 KX-TDA200

Reviews:

Related manuals for KX-TDA100 KX-TDA200

Brands by name

Popular brands