Panasonic KX-TD816RU, Installation Manual And Programming Tables

Page: 11 / 44

11
To Terminal Board or Modular
Jacks from the Central Office
7. Insert the plug into a jack on the unit.
Connect an earth wire to the earth terminal
on the extension expansion unit.
KX-TD286
P
an
as
on
ic
Jack
no.
S01
S02
S03
S04
S05
S06
TB
TA
RA
RB
RB
RA
TA
TB
for internal
ISDN S0
line
Note • All ports can be either for CO line or
extension line.
Installing Expansion Unit (KX-TD286)
6. Prepare the required plugs. Six 4-pin
plugs are included in KX-TD286 to
connect CO lines or ISDN terminal
equipment.
For unit installation, refer to the procedure “Installing Expansion
Unit (KX-TD280)” in the main Added and Changed Features for
Installation Manual and Programming Tables Vol. 1. Steps 1
through 5 and 8 through 11 of the installation procedure are the
same as the KX-TD280. Step 6 and Step 7 are different from those
of KX-TD280. Please note the following instructions below
instead of step 6 and step 7 for this unit.
Note • System Programming [109] Expansion Unit Type is required for the
expansion unit location identification.