4.6
CO Line Programming
ISDN Configuration
426
22
Description
Assigns the configuration on ISDN port basis. This program is
available for ISDN extension only.
Selection
• Port number: KX-TD816—01 through 06,
(
=all ports)
KX-TD1232—01 through 12,
(
=all ports)
• Point (point to point) / Multipoint (point to multipoint)
Default
• KX-TD816 Port 05 and 06– Multipoint; other ports–Point
• KX-TD1232 All ports – Point
Programming
1.
Enter 426.
Display: Access Mode
2.
Press NEXT.
Display: Port NO?–>
3.
Enter a port number.
To enter a first port number, you can also press NEXT.
Display example: #01:Point
4.
Keep pressing SELECT until the desired selection is
displayed.
5.
Press STORE.
6.
To program another port, press NEXT or PREV, or
SELECT and the desired port number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• For the KX-TD1232, port numbers 01 through 06 are for the Master
System and 07 through 12 are for the Slave, if available.
• If one equipment is connected to the ISDN port, select "Point." If
multiple equipments are connected, select "Multipoint."
• To assign all ports to one selection, press the
key at step 3. In this
case, the display shows the contents programmed for a first port.
• After this assignment, you should reset the system so that this
assignment is effective.
Feature References
None
Summary of Contents for KX-TD816RU
