Panasonic KX-TD816, Programming Manual, Page: 427 / 443

Default Values 427
[314-321] ARS Leading Digit Entry for Plans 1
through 8
All locations – Not stored
[322-329] ARS Routing Plans 1 through 8 All time schedules – Not stored
[330] ARS Modify Removed Digit All modification tables – 0
[331] ARS Modify Added Number All modification tables – Not stored
[332] Extra Entry Table Selection Except - 2
[333] TRS Entry Code Assignment for Extra
Table
All locations – Not stored
[334] Emergency Dial Number Set All locations – Not stored
[340] TIE Line Routing Table All locations – Not stored
[341] TIE Modify Removed Digit / Added
Number
All locations – Deleted digit=0; Added
Number=Blank
[400] Outside Line Connection Assignment All outside lines – Connect
(If KX-TD290 or KX-TD188 is connected: All
outside lines in the Slave System – No Connect)
[401] Outside Line Group Assignment CO01 – TRG 1;
CO02 – TRG 2;
CO03 – TRG 3;
CO04 – TRG 4;
CO05 – TRG 5;
CO06 – TRG 6;
CO07 – TRG 7;
CO08 – TRG 8 (for KX-TD816)
CO08 through CO54 – TRG 8 (for KX-TD1232)
[402] Dial Mode Selection KX-TD816BX, KX-TD1232(D)BX/ML, KX-
TDN1232: All outside lines – Pulse
KX-TD816HK, KX-TD1232HK/X: All outside lines
– DTMF
[403] Pulse Speed Selection All outside lines – 10 pps
[404] DTMF Time All outside lines – 80 ms
[405] CPC Signal Detection Incoming Set All outside lines – Disable
[406] Caller ID Assignment All outside lines – Disable
Programme Default