Panasonic KX-TD816, Programming Manual

Page: 108 / 443

2.2 System Programming
108 General Programming
[136] DID / DDI Number Assignment
Description
Assigns the Direct Inward Dialling (DID) number which is converted from the DID subscriber
number using the programmes [433]
DID / TIE Subscriber Number Removed Digit and
[434] DID / TIE Added Number. And also assigns the Direct Dialling In (DDI) number. If
the converted number matches the number assigned in this programme, it reaches the
destination assigned in programme [137-138]
DID / DDI Extension – Day / Night.
Selection
• Location number: 001 through 200
• DID / DDI number: 16 digits (max.)
Default
All locations – Not stored
Programming
1.
Enter 136.
Display: 136 DID NUMBER
2.
Press NEXT.
Display: Location NO?
3.
Enter a location number.
To enter location number 001, you can also press NEXT.
Display example: #001:Not Stored
4.
Enter a DID / DDI number.
To delete the current entry, press CLEAR and enter the new number.
To assign no number, press CLEAR.
5.
Press STORE.
6.
To programme another location, press NEXT or PREV, or SELECT and the desired
location number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• There is a maximum of 200 DID / DDI numbers. Each DID / DDI number can be one
through 16 digits, consisting of 0 through 9 and (wild card).
• If the same DID / DDI number is assigned to different locations, only the number at the
lowest location number becomes available. The others are disregarded.