Panasonic KX-TD816, Programming Manual, Page: 203 / 443

2.5 Outside Line Programming
General Programming 203
[433] DID / TIE Subscriber Number Removed Digit
Description
Assigns the removed digits of received a DID and TIE subscriber number for each DID / TIE
format. In this case, digits are removed from the beginning of the received digits.
Selection
• DID / TIE format number: 1 through 8
• Number of digits to be deleted (RMV): 0 through 6 (0=no deletion)
Default
All DID / TIE formats – RMV:0
Programming
1.
Enter 433.
Display: 433 REMOVE DIAL
2.
Press NEXT.
Display: Format NO?
3.
Enter a DID / TIE format number.
To enter DID / TIE format number 1, you can also press NEXT.
Display example: 1:0
4.
Enter the number of digits to be deleted.
To change the current entry, press CLEAR and enter the new number.
5.
Press STORE.
6.
To programme another DID / TIE format, press NEXT or PREV, or SELECT and the
desired DID / TIE format number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• You cannot leave the entry empty.
• You must confirm with your central office regarding the number of digits being sent.
Features Guide References
Direct Inward Dialling (DID)
E1 Line Service
TIE Line Service