Panasonic KX-TD816, Programming Manual

Page: 169 / 443

2.5 Outside Line Programming
General Programming 169
2.5 Outside Line Programming
[400] Outside Line Connection Assignment
Description
Used to identify the outside lines which are connected to the system(s). This prevents users
from originating a call to a line which is not connected.
Selection
• Outside line (CO) number:
KX-TD816 – 01 through 08,
KX-TD1232 – 01 through 54,
( =all outside lines)
• Connect / No Connect
Default
All outside lines – Connect
(If KX-TD290 or KX-TD188 is connected: All outside lines in the Slave System – No
Connect)
Programming
1.
Enter 400.
Display: 400 CO CONNECT
2.
Press NEXT.
Display: CO Line NO?
3.
Enter an outside line number.
To enter outside line number 01, you can also press NEXT.
Display example: CO01:Connect
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another outside line, press NEXT or PREV, or SELECT and the desired
outside line number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• For the KX-TD1232, outside lines 01 through 12 are for the Master System and outside
lines 13 through 24 are for the Slave, if available.